About us

About us

"3D Impulse" Laboratory is a scientific research unit of the Faculty of Mechanical and Civil Engineering in Kraljevo, which deals with the application of digital technologies to develop new products.

The laboratory was established in the within the project "Innovation Management for New Products", known by the acronym "IMPulse", funded by the European Commission (with the amount of € 966,624), the City of Kraljevo (with the amount 3,500,000 dinars) and City of Cacak (the amount of 3,000,000 dinars). The project was implemented in the period 2011-2013:

The results of the project "Impulse" upgraded two projects supported by the USAID Sustainable Local Development Program (worth $ 38,000 and 5000 $) which raised the capacity of laboratories for the promotion and continuing education in the field of digital technologies for product development.

Mission

"3D Impulse" Laboratory  stimulates innovation and increases the competitiveness of the economy and its environment promoting and applying digital technologies for new product development.

Vision

"3D Impulse" Laboratory accomplish with companies by realizing a multitude of small projects which helps continuous development of new and improvement of existing products. The laboratory is a center that provides a common education, consulting and development services to companies that individually would not be able to afford the use of modern technical achievements.

O nama

O nama

urednik Wed, 08/14/2013 - 14:43

People

People

We know that the base of any progress are knowledge - and its main carriers are the people. We are proud of our experts in which we have invested a lot of knowledge, and will continue to do so in the future. We are especially pleased that our staff include PhD and master students of the Faculty of Mechanical and Civil Engineering in Kraljevo, which contributes to our mission of introductions.

Ljudi

HEAD OF LABORATORY

Sneža

Leader and founder of the laboratory is Dr. Snezana Kostic Ciric, docent at the Faculty of Mechanical and Civil Engineering in Kraljevo, and it is responsible for the organization of laboratories and collaboration with service users.

Snežana is graduated at the Faculty of Mechanical Engineering Kraljevo, production-economic departmen, she have a MA degree, Mechanical Engineering in Belgrade, department of general machine construction, and the PhD degree in the field of construction of mechanical systems successfully defended in Mechanical Engineering in Kraljevo. She has specialized in the study visit at the University of Bologna and study trips to Germany and Croatia.

She teaches Machine Elements and Machine Design and Development at the Faculty of Mechanical and Civil Engineering in Kraljevo. She has published 12 works in scientific journals and 45 presentations at scientific conferences, participated in 9 national and 4 international projects, and she was team leader of the „IMPuls“ project, which established the Laboratory.

Lead engineer for additive production

Nebojša

Mr Nebojsa Bogojević is the leading engineer for additive production, responsible for the preparation and realization of selective laser sintering production. Nebojsa is a mechanical engineer graduated at the Faculty of Mechanical and Civil Engineering in Kraljevo in the design and construction of mechanical systems. He specialized at study visit to Sweden, in the field of additive manufacturing are studied in specialized courses in Kraljevo and study tours in Germany.

Hi is teaching assistant at the Department of construction and design in mechanical engineering. He has published 11 work in scientific journals and 24 presentations at scientific conferences, co-authored one patent and participated in 6 national and 4 international projects.

 

Lead engineer for optical scanning

Aleksandar

Aleksandar Vranic is the leading engineer for optical scanning, in charge for the preparation and implementation of 3D scanning, quality control and reverse engineering.

Alexander is a mechanical engineer who graduated at the Faculty of Mechanical Engineering and Civil Engineering in Kraljevo in the design and construction of mechanical systems. In the field of optical scanning, he attended the specialized courses in Kraljevo and study tour in Germany.

Teaching assistant at the Department of basic mechanical construction and materials technology. He has published 3 works in scientific journals and 5 announcements at scientific conferences.

urednik Tue, 09/10/2013 - 00:00

Contacts

Contacts

Kontakt podaci

Address
„3D Impuls“ Laboratory
Faculty of Mechanical and Civil Engineering in Kraljevo
Dositejeva 19
36000 Kraljevo
Serbia

Phone
Operator: +381 36 383 377
Fax: +381 36 383 380
Head of Laboratory: +381 64 893 88 26
Additive manufacturing Engineer: +381 64 893 88 22
Digitization Objects Engineer: +381 64 893 88 82
Accountancy: +381 64 893 88 03

E-mail
impuls@mfkv.kg.ac.rs

urednik Tue, 09/10/2013 - 15:00

Location

Location

How to reach us?

Address
„3D Impuls“ Laboratory
Faculty of Mechanical and Civil Engineering in Kraljevo
Dositejeva 19
36000 Kraljevo
Serbia

Lokacija na Google mapi

From the Krusevac and Kragujevac direction
After entering the Kraljevo crossing the river Morava (from the Kragujevac and Ibar direction), (from the direction of Krusevac over Ratine bypass), and passing the factory "Magnohrom" pump-gas, the mall "DIS" and gas station "NIS", on the right side of the road is parking place of the Faculty of Mechanical Engineering and Civil Engineering in Kraljevo, can be easily identified by airplane model, Monument to airplane factory.

From Čačak and Raška direction
After passing through the first intersection with traffic lights continue straight (if you crossing the railroad overpass before intersection) or left (if you crossing the railroad overpass before in level), continue 2.5km down the street with separate lanes, passing through more three intersections with traffic lights. Parking at the Faculty of Mechanical Engineering and Civil Engineering in Kraljevo, located on the left side can be easily identified by airplane model, Monument to airplane factory.

urednik Tue, 09/10/2013 - 00:00

Equipment

Equipment

"3D Impulse" Laboratory is aware of the role that equipment plays in modern concepts of new product development, and equipping laboratories devoted great attention. On this page we display equipment that plays a key role in the Laboratory.

EOS INT M280

Oprema

EOS INT M280 the machine for selective laser sintering of metal Objects produced by the German manufacturer EOS from the Munich surrounding. By using this machine objects can be produced from:

  • tool and stainless steel
  • alloyed steels
  • aluminum
  • titanium

whose dimensions are limited by overall dimensions of working chamber machine that has dimensions of 250x250x325 mm. Layer thickness of the materials are made of stainless steel objects is 20μma Of tool steel 40μm.

EOS Formiga P100

Oprema

EOS Formiga P100 is a machine for selective laser sintering Objects of plastics produced by the German manufacturer EOS from the surrounding Munich. By using this machine objects can be produced from:

  • polymeric materials based on polyamide
  • polymeric materials with additions of metal particles
  • composite materials with polymer matrix strengthened with glass fibers

whose dimensions are limited by overall dimensions of working chamber machine that has dimensions of 200x250x330 mm. Layer thickness of material used to produce objects is 100μm.

Atos Compact Scan 5M

Oprema

Atos Compact Scan 5M an optical scanner for measuring and quality control. By using two cameras to capture the object being scanned and a projector that emits blue light achieves high resolution enables measurement points position on the object surface with an error of less than 15μm. Atos Comapact Scan 5M is a robust and portable device, which allows you to work in the field.

urednik Tue, 09/10/2013 - 00:00

References

References

We believe that the best recommendation for our work, our customers. Within the project "Impulse" Our laboratory has developed 308 computer models  and 121 prototype for the companies from Raski, Rasinski and Morava region. Building upon the results of this project, our laboratory has expanded its work on the whole territory of Serbia and neighboring countries.

PROJECTS

  • „Innovative management for new products“, European Commission Delegation project in Republic of Serbia, 2011-2013.
  • „Procurement of the multimedia and other equipment serving IMC area of Kraljevo“, USAID project, 2012.
  • "Digital technology for rapid product development", Center for the Promotion of Science project, 2012.
  • ImPossible design", Center for the Promotion of Science project, 2013.

PROTOTYPES

  • Bekto Precisa, Goražde /Bosnia and Hercegovina/
  • InMold, Požega /Serbia/
  • Spektar, Čačak /Serbia/
  • Cini, Čačak /Serbia/
  • MTTC, Gračanica /Bosnia and Hercegovina/
  • Evrotehna, Kraljevo /Serbia/
  • Elit Inoks, Čačak /Serbia/
  • Uniplast, Vrnjačka Banja /Serbia/

QUALITY CONTROL

  • Orao, Bijeljina /Bosnia and Hercegovina/
  • Spektar, Gornji Milanovac /Serbia/
  • Aero East Europe, Kraljevo /Serbia/
  • Omni projekt, Vrnjačka Banja /Serbia/

TOOL PRODUCTION

  • Marel, Kruševac /Serbia/
  • Dekor plast, Vrnjačka Banja /Serbia/
  • Korali, Kraljevo /Serbia/
     

SMALL SERIES PRODUCTIONS

  • Ser Viking, Trstenik /Serbia/
  • Atelje Marinković, Kraljevo/Serbia/

REVERSE ENGINEERING

  • Trajal, Kruševac /Serbia/
  • Sato, Kraljevo /Serbia/
  • Poliplast, Vrnjačka Banja /Serbia/
urednik Tue, 09/10/2013 - 00:00

Others about us

Others about us

We do not like to brag, but we like when somebody commend us. Here's selection of what others said and written about us ...

PRESS

Magazine „Nova Ekonomija“, September 2013
http://www.big.co.rs/sr/nova-ekonomija/vesti-iz-zemlje/projekat-impuls-u-kraljevu
http://www.big.co.rs/sr/nova-ekonomija/arhiva-izdanja

Daily newspaper „Kraljevačke novosti“
http://www.kraljevackenovosti.com/index.php?option=com_content&view=article&id=735:jo-jedan-uspeh-mainskog-fakulteta-u-kraljevu
http://www.kraljevackenovosti.com/index.php?option=com_content&view=category&layout=blog&id=53&Itemid=76

TV show

„EconNews“ show, Studio B, 21. May 2013 -TV report
http://www.youtube.com/watch?v=jz9k_tD0F6s
„Projekat IMPuls“, KaTV, 22.8.2013, autor Marina Miljković Dabić
http://www.katv.rs/index.php/2013-09-10-13-32-38/a

INTERNET

EU delagation in Republic of Serbia, RSEDP2 program:
http://www.rsedp2serbia.eu/sr/vesti/promocijaprojektaimpulsi-svecano-otvaranje-laboratorije-%E2%80%9E3d-svet/
http://www.rsedp2serbia.eu/news/impuls-opened-its-newly-equipped-3d-world-laboratories/
http://www.europa.rs/mediji/najnovije-vesti/1705/Poziv+za+medije+-+ambasador+Vensan+De%C5%BEer+u+poseti+Kraljevu.html  (The visit by the EU Embassador Vensan Dežer to our laboratory)
http://www.rsedp2serbia.eu/project/support-to-grant-scheme/project17/

USAID

http://lokalnirazvoj.rs/impuls-web-site-grant.html
http://www.lokalnirazvoj.rs/assets/files/mapa_doc/srb/KV.pdf

Festival of science Žabljak, April 2013.
http://www.youtube.com/watch?v=Cf88XR6N2hk

Economy-biznis portal, 21.6.2011.
http://www.economy.rs/vesti/16437/Centar-za-brzi-razvoj-novih-proizvoda.html

Regional Chamber of Commerce Kraljevo
http://www.rpk-kraljevo.co.rs/node/256
http://www.rpk-kraljevo.co.rs/node/495
http://www.rpk-kraljevo.co.rs/node/438
http://www.rpk-kraljevo.co.rs/node/543
http://www.rpk-kraljevo.co.rs/node/516

urednik Tue, 09/10/2013 - 15:47